Radioband 3G Wireless Safety Edge Transmission
- The RadioBand 3G system is compatible with all types of safety gate safety edges resistive and switched normally open / normally closed.
- This third-generation system meets the needs of todays market as a result of the following improvements:
- The RBAND3T and RBAND3T GL transmitters feature 2 independent inputs to enable the connection of 2 safety edges to the same transmitter. Depending on the position of the three or switches, one or the other safety edge can be connected.
- 2 operating modes, ensuring that, irrespective of the control panel and the optical sensors connected, the system will function with one mode or the other. Smart adjustment of communication power between the receiver and the transmitter, providing a greater range than previous generations.
- Transmission with 8.2kohm resistor edges or switched edges.
- CAT 2 Autotest Compatible
3G transmitter for optical, resistive and mechanical safety edges:
- Operating frequency: 868 MHz
- Multi-frequency system: 4 self-adjusting channels at 868 MHz
- It controls up to 2 safety edges in the same transmitter.
- No need for an activation signal for the optical safety edge, as it is permanently active.
- Approximate battery life of 2 years.
- Nominal range: 100m
- Power supply: Two 3.6VDC ER14500 Li-SOCL Batteries.
- Operating temperature: -20°C to +85°C.
- Protection: IP65.
- Box dimensions: 151 x 60 x 23 mm
3G Receiver:
- Operating frequency: 868MHz.
- Memory: 6 transmitters (3 in relay 1, 3 in relay 2).
- Number of relays: 3.
- Relay 3 used as low battery or alarm signal.
- Power supply: 12/24VAC/DC.
- Power range: 12/24VAC/DC + - 10%
- Relay contacts: 1A.
- Consumption: 255mA max.
- Autotest input: One input 0/12/24VAC/DC with able polarity.
- Radiated power: <25 mW.
- Operating temperature: -40°C to +85°C.
- Protection: IP54 (IP65 with gland seals).
- Box dimensions: 82 x 190 x 40 mm.
Click Here For Safety Edges
Safety
The Electric Gate Shop are committed to providing safe electric gate solutions. The Gate Safety Guide runs through the hazards, and outlines a code of practice.
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy '
Photocell Beams'.
Please call us with any questions.
All automated / electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits, and is available to
view here.
Instruction Manual for the JCM T868 Transmitter
Instruction Manual for the JCM R868 Reciever
Radioband 3G Wireless Safety Edge Transmission
- The RadioBand 3G system is compatible with all types of safety gate safety edges resistive and switched normally open / normally closed.
- This third-generation system meets the needs of todays market as a result of the following improvements:
- The RBAND3T and RBAND3T GL transmitters feature 2 independent inputs to enable the connection of 2 safety edges to the same transmitter. Depending on the position of the three or switches, one or the other safety edge can be connected.
- 2 operating modes, ensuring that, irrespective of the control panel and the optical sensors connected, the system will function with one mode or the other. Smart adjustment of communication power between the receiver and the transmitter, providing a greater range than previous generations.
- Transmission with 8.2kohm resistor edges or switched edges.
- CAT 2 Autotest Compatible
3G transmitter for optical, resistive and mechanical safety edges:
- Operating frequency: 868 MHz
- Multi-frequency system: 4 self-adjusting channels at 868 MHz
- It controls up to 2 safety edges in the same transmitter.
- No need for an activation signal for the optical safety edge, as it is permanently active.
- Approximate battery life of 2 years.
- Nominal range: 100m
- Power supply: Two 3.6VDC ER14500 Li-SOCL Batteries.
- Operating temperature: -20°C to +85°C.
- Protection: IP65.
- Box dimensions: 151 x 60 x 23 mm
3G Receiver:
- Operating frequency: 868MHz.
- Memory: 6 transmitters (3 in relay 1, 3 in relay 2).
- Number of relays: 3.
- Relay 3 used as low battery or alarm signal.
- Power supply: 12/24VAC/DC.
- Power range: 12/24VAC/DC + - 10%
- Relay contacts: 1A.
- Consumption: 255mA max.
- Autotest input: One input 0/12/24VAC/DC with able polarity.
- Radiated power: <25 mW.
- Operating temperature: -40°C to +85°C.
- Protection: IP54 (IP65 with gland seals).
- Box dimensions: 82 x 190 x 40 mm.
